Fan Light Combination Fixture
Fan Always Hot / Light Switched
For those that live where the new 2011 NEC code is in effect, please read
‘2011 NEC New Rule ‘Switch Connections’
If this applies to you, the switch wiring options that is in compliance with this new rule will be indicated bellow as ‘2011 NEC compliant’
Under the desired Category Click on the desired Wiring Option Bellow…
If 2011 NEC 404.2 (C) is not applicable to you or if you fall under an exception to this new rule
* Power Source at Fixture
* Power Source at Switch
* Power Source at Fixture & two 3-way Switches required
* Power Source & Fixture feed at Same Switch , two 3-way Switches required
* 3 way Switches, Power at Fixture, 3 wire (plus ground) Cable being routed thru the Ceiling box between Switches
2011 NEC 404.2 (C) Compliant Switch Circuit Options
* Power Source at Fixture
* Power Source at Switch
* Power Source at Fixture & two 3-way Switches required
* Power Source & Fixture feed at Same Switch , two 3-way Switches required
* 3 way Switches, Power at Fixture, 3 wire (plus ground) Cable being routed thru the Ceiling box between Switches
WHILE EXTREME CARE HAS BEEN IMPLEMENTED IN THE PREPARATION OF THIS SELF-HELP DOCUMENT, THE AUTHOR AND/OR PROVIDERS OF THIS DOCUMENT ASSUMES NO RESPONSIBILITY FOR ERRORS OR OMISSIONS, NOR IS ANY LIABILITY ASSUMED FROM THE USE OF THE INFORMATION, CONTAINED IN THIS DOCUMENT, BY THE AUTHOR and / OR PROVIDER.
By: Donald Kerr